The 3/8 BSP thread has a major outside diameter of 16.662 mm with 19 threads per inch (1.337 mm pitch). The number in the name is NOT the thread diameter: 3/8 BSP refers to the historical pipe bore, which is why a 3/8 BSP male measures 16.662 mm across, not 3/8 inch. Both the parallel form (G3/8, BS EN ISO 228-1) and the taper form (R3/8, BS EN 10226-1) share these thread dimensions - the difference is the 1:16 taper on R threads.
3/8 BSP dimensions
| Property | Value | Standard |
|---|
| Parallel designation | G3/8 (BSPP) | BS EN ISO 228-1 |
| Taper designation | R3/8 external / Rp3/8 internal parallel | BS EN 10226-1 |
| Threads per inch (TPI) | 19 | shared |
| Pitch | 1.337 mm | computed (25.4/TPI) |
| Major diameter | 16.662 mm | ISO 228-1 |
| Pitch diameter | 15.806 mm | computed (Whitworth form) |
| Minor diameter | 14.950 mm | computed (Whitworth form) |
| Tapping drill (G, parallel) | 14.95 mm (= minor dia; round up to stock drill) | derived |
| Thread form | Whitworth, 55 degrees, rounded crests and roots | shared |
G3/8, R3/8, Rp3/8: which one seals, and how
G3/8 (BSPP, parallel) does not seal on the threads: it needs a bonded washer, O-ring or face seal, and it torques to a positive stop. R3/8 (BSPT, taper external) seals on the thread flanks with PTFE tape or sealant as it wedges in. Rp3/8 is a PARALLEL female made to take a taper male - the common combination on valves and fittings. Never rely on a G male into an Rp female to seal without a washer: parallel-into-parallel has no wedge action.
How to identify a 3/8 BSP thread
Measure the male thread's outside diameter with calipers and count TPI against a thread gauge or a steel rule. 16.662 mm and 19 TPI together confirm 3/8 BSP. If the diameter is close but the count is 60-degree NPT-style, it is an American pipe thread - BSP and NPT do not interchange: the flank angles differ (55 vs 60 degrees) and mixing them produces a joint that feels tight and leaks under pressure.
Where 3/8 BSP turns up
Pneumatic fittings, gauges, small hydraulic ports and instrumentation.
Frequently Asked Questions
What diameter is a 3/8 BSP thread?
A 3/8 BSP male thread measures 16.662 mm across the outside diameter, with 19 threads per inch. The 3/8 in the name refers to the historical pipe bore, not the thread size.
What is the difference between G3/8 and R3/8?
G3/8 is the parallel (BSPP) version and seals with a washer or O-ring on a face, not on the threads. R3/8 is the taper (BSPT) version with a 1:16 taper that seals on the thread flanks with PTFE tape or sealant. Thread diameter and pitch are the same on both.
What is the tapping drill for G3/8?
The minor diameter of 3/8 BSP is 14.95 mm, so use the nearest stock drill at or just above that figure. Drilling undersize makes tapping a 19 TPI Whitworth-form thread hard work; oversize reduces thread engagement.
Will 3/8 BSP fit 3/8 NPT?
No. BSP uses a 55-degree Whitworth thread form and NPT uses 60 degrees, and the pitches differ on most sizes. The two may start to engage but will not seal reliably - a BSP-to-NPT adaptor is the correct fix.